SLAM Environmental Pre-sets
Common data capture scenarios, such as UAV, outdoor, indoor, linear, and vehicle, have been characterised in Connect and data processing pre-sets for each environment have been defined.
Known control points are captured during a scan and automatically compared and matched to the associated coordinates during the processing stage in Connect.
Closed and Open Loop Georeferencing
Both methods match the scan data from a ZEB Locate system with the GPS data collected from the antenna to georeference the point cloud.
Stop-and-Go Scan Alignment
Common static points are captured during several scans meaning that these datasets can be automatically aligned. A single point cloud is then exported as if the data was captured in a single scan.
Horizontal and vertical slices can be taken from any location within the point cloud. Horizontal floor slices can also be automatically taken at a given height above the floor as defined in the processing stage.
Multiple point clouds can be compared and any areas that have changed are automatically highlighted. Point clouds can also be compared with CAD models.
Integrate photos, notes and voice notes, alongside custom asset tags while capturing data. The smartphone data is then processed and located inside the point cloud